Tip #1 - Clamps
Terry Godwin

You never have enough or the right clamp to hold planks while glue sets.
I found that a strong Nylon string, with a sacrifice piece of wood to prevent cutting into the
good plank, made a very good clamp. The string is fed through the frames and tied
together to make a loop. The string can fit between fairly closely spaced frames. The quick
clamps are putting tension on the other end of the string loop in one photo and in the other
photo are used to hold a tourniquet twister from moving.

You can get very innovative with string for clamps and fit it to a lot of applications.